Skip to content

Fire watch in Burlingame

Fire watch in Burlingame

A dedicated officer walking your Burlingame building on continuous rounds while the fire alarm or sprinklers are out, with a timed record of every round.

Request a quoteCall (650) 376-8218

Office corridor with sprinkler heads, red fire alarm pull stations and a window over the bay at sunset

Cost calculator

Estimate your cost

Fire watch, tailored to your property

A hotel with a failed alarm panel can’t simply wait for parts. Neither can an office tower with sprinklers shut for a tenant improvement. Until the system is back, someone has to be walking the building.

That’s the fire watch officer’s only job. They move through each affected floor and area without stopping, watching for smoke or heat, keeping exits and corridors clear, and staying ready to sound the alarm and call for help. Every round goes into a timed log that stays on site for your engineering team, your contractor and anyone who asks to see it.

Call us the moment you learn a system is impaired. Fire watch can cover a single night, a weekend or several weeks of work. On active construction projects, it can run alongside the site’s regular security.

Step by step

How it works

01

Call us

Tell us which system is impaired and which floors or areas it affects.

02

Plan the route

A round that covers every affected area.

03

Uninterrupted rounds

The officer walks the route until the system is restored.

04

The log is yours

A timed record of every round, kept on site.

Planning the route through an occupied building

In a Burlingame hotel or office tower that stays open during an impairment, the route has to reach every affected area without stalling in the busy ones. We map it floor by floor with your engineer: guest corridors, stairwells, back-of-house rooms, mechanical and electrical spaces, kitchens and any floor where contractors are working. The officer walks it in a steady loop and starts again the moment it ends.

Guests and tenants see an officer moving calmly through the building, not a crisis. The officer knows where the pull stations and exits are on each floor, which staff member to alert first and how to reach the fire department if they see smoke or heat.

Fire watch responsibilities, round by round

Fire watch responsibilities are narrow on purpose. The officer walks the affected areas in a set order, looks into each room and corridor on the route and deals with anything that could start or spread a fire: a fire door wedged open with a chair, boxes stacked against a sprinkler head, an extension cord under a rug or a contractor’s torch cart parked beside cardboard. What can be fixed on the spot, such as closing the door, gets fixed; the rest goes straight to your engineer.

The fire watch log keeps the rounds accountable. Each entry is signed by the officer who walked it, and at a shift change the incoming officer reads the log and starts the next round where the last one ended, so the route never sits unwalked. When the system is back in service, your team keeps the finished log with the repair paperwork.

Hot work and renovation days

Tenant improvements in office buildings near the airport often involve cutting, welding or grinding while part of the sprinkler system is shut. On those days the fire watch officer stays close to the work area while sparks are possible and keeps checking it after the crew packs up, since smoldering material is easy to miss once the lights go off.

When the project already has jobsite security with us, the fire watch runs as its own post alongside it, so the gate officer keeps checking in subcontractors while the fire watch officer keeps walking. Our fire watch basics guide covers what to tell us when you call.

Fire watch costs for Burlingame hotels and offices

As of 2026, fire watch in Burlingame typically costs $43 to $63 per officer-hour, and a short, scheduled watch on a single floor starts near $38. The range follows the guard-hour and fire watch rates California providers publish.

Hotels feel this one most. If a bayfront hotel’s alarm panel fails on a Monday and the replacement takes until Saturday, a continuous watch for five days is 120 hours. At $55 an hour, that’s about $6,600. A hotel with two towers might need a second officer so every floor is walked on schedule, which doubles the hours.

Overnight and holiday hours, same-day starts, guest floors with many stairwells and renovation days with hot work push the rate toward $86. Occupied buildings take more care than empty ones, because the officer moves quietly past guest rooms while keeping exits and corridors clear. A planned watch around a scheduled sprinkler shutdown stays near the low end. Let us know as soon as the outage is on the calendar, and we’ll walk the route with your engineer and send a written quote.

A few useful answers

Common questions

Who decides that we need a fire watch?

Usually the local fire department, and sometimes your insurer. Your fire protection contractor can tell you when an impairment calls for one. Once a watch is required, we supply the officer.

How soon can a fire watch officer be at our building?

For a Burlingame hotel or office with a system down, a fire watch officer can often start within a day of your call. Phone us as soon as you learn the system is down rather than sending the form, and have the affected floors ready to describe.

Can our existing guard also do the fire watch?

Usually it’s better as its own post, so the rounds aren’t interrupted by desk duties.

What’s recorded in the log?

The time of each round, the areas checked and anything the officer noticed.

What do you need from our engineer on the first night?

A list of the impaired systems and affected floors, keys or access cards for the route, and the name of the person to call on site. With that in hand, the route and the log start right away.

Can fire watch cover a parking structure or warehouse?

Yes. The route is drawn around whatever areas the impairment affects, including garages, docks and storage rooms.

What is a fire watch, and when is one needed?

A fire watch is an officer posted to walk a building, or the part of it, whose fire alarm or sprinklers are out of service, looking for fire hazards and recording every round. It covers the gap during a panel failure, a sprinkler shutdown for repairs or hot work in an impaired area, and ends once the system is restored.

Related services

Pair it with

Industries

Properties for fire watch

Let’s protect your Burlingame property

Get a quoteCall (650) 376-8218