Skip to content

Construction site security in Burlingame

Construction site security in Burlingame

Jobsite security for Burlingame projects, from downtown infill to bayfront hotel and office builds: a controlled gate by day and protection after hours.

Request a quoteCall (650) 376-8218

Timber-framed building in scaffolding behind a padlocked, screened fence with a light tower, construction site security

Cost calculator

Estimate your cost

Construction site security, tailored to your property

Tight urban sites and large bayfront projects share the same weak point. Once the crews leave, materials, tools and equipment are easy pickings, and every loss costs time as well as money.

During working hours, a gate officer can check in every subcontractor and delivery, so you have a record of who was on site and when. After hours, we can combine overnight guards, randomized patrol visits and camera monitoring to fit the phase and the budget. Hot work or an impaired system? Fire watch can be added.

Each shift ends with a report by email, and incidents include photos, so the superintendent and owner’s rep are working from the same facts. Coverage scales up and down with the schedule and ends at turnover. Before the first shift, the general contractor receives our certificate of insurance for the project file.

Step by step

How it works

01

Walk the job

We look at the fence line, gates, staging and neighbors. No charge.

02

Choose the mix

Gate officer, overnight guard, patrol, cameras or a blend.

03

Cover every phase

From demolition through turnover, adjusted as the work changes.

04

Daily reporting

An emailed report after every shift, with photos of any incident.

Coverage by project phase

Demolition and early site work bring scrap metal and rental equipment onto an open lot, so overnight presence matters before any walls go up. During framing and rough-in, the targets shift to lumber, copper and wire, along with tools left in gang boxes. Once the building is closed in and finishes arrive, fixtures, appliances and flooring become the main concern, and the interior itself needs checking.

We revisit the plan at each of those turns. A downtown infill project might move from a posted overnight guard to cameras and patrol once the shell is locked, while a larger bayfront build might keep a gate officer longer while deliveries peak. The daily reports make those calls easier, because they show exactly when and where activity happens after hours.

What to send before the walk

A short packet from the superintendent makes the walkthrough faster and the quote sharper. The full jobsite checklist goes deeper on lighting, staging and theft deterrence.

Gate checks, equipment and the after-hours patrol

The gate officer’s job doesn’t stop at who comes in. Equipment going out gets the same attention: a rental lift heading back to the yard, a trailer of tools or a pallet of fixtures leaving on a subcontractor’s truck is checked against the superintendent’s release list before it rolls through. Anything without a release waits at the gate until your contact says yes.

Once the crews leave, the after-hours patrol works through the site in a set loop: storage containers and gang boxes locked, heavy equipment parked inside the fence, the generator and fuel tanks untouched, and the material drop zone by the street checked for anything moved since the last pass. On sites without an overnight post, mobile patrol runs those checks at randomized times and logs each one.

Construction site security costs in Burlingame

Jobsite security is calculated per guard-hour and normally quoted as a monthly price for each post. Jobsite security in Burlingame typically runs $36 to $50 an hour in 2026, per published market data for Bay Area jobsites, and a basic overnight post on a small fenced site sits at the low end of that range.

On a downtown infill project, a gate officer from 6:30 a.m. to 3:30 p.m. on weekdays logs every subcontractor and delivery. That’s 45 hours a week, about 195 hours a month, and at $43 an hour it comes to roughly $8,385 a month. Nights and weekends on the same site can go to randomized patrol stops and camera monitoring, which adds far less than a second post would.

Union or prevailing-wage terms, several gates, a large laydown area near the bayfront, high-value equipment and posts added the morning after a theft push the hourly rate toward $50. A compact site with good lighting and a single gate stays close to the low end, and coverage usually tapers once the building is closed in. Send us the site plan before the free walkthrough, and the written quote will set out coverage for each phase.

A few useful answers

Common questions

Can the gate officer log every delivery?

Yes. Subcontractors and deliveries are checked in and logged during working hours.

Can we mix guards, patrol and cameras?

Yes. A blend is usually the most cost-effective way to cover a jobsite.

What happens when the project changes phase?

We revisit the plan and shift posts or patrol stops to match.

Do we have to keep coverage past turnover?

No. Contracts run month to month, so coverage ends when the job does.

Do you have a jobsite checklist?
How do you handle a delivery that shows up after hours?

The officer on site checks it against the list you provide, logs the driver, company and time, and calls your contact before letting anything unexpected through the gate.

Does the after-hours plan cover the laydown yard?

Yes. Staging and laydown areas are part of every after-hours round, and they are a natural first place to aim cameras.

How often does the after-hours patrol pass through the site?

As often as the phase calls for. A fenced lot with little on it might get a few randomized visits a night, while a site with copper and fixtures staged gets more visits or a posted guard. Every pass is logged with the time.

Related services

Pair it with

Industries

Properties for construction site security

Let’s protect your Burlingame property

Get a quoteCall (650) 376-8218